キャンプのTentage CPAI -84のための縦の炎の抵抗の織物の器具

制御機能: 実際の必要に応じて手動または自動的に選択することができます

面積流量範囲: 0.1-1m3/h ((1.66~16.6dm3/min),調整可能

部屋の大きさ: W300 * D450 * H1200mm

製品名: EC60332/EN50265-1 シングルケーブル 垂直燃焼試験機 ケーブル燃焼性の評価室

燃える時間: 設定時間中に炎は,連続して試料を燃やす可能性があります

製品カテゴリー: 燃焼性試験装置

標本の長さ: 600±25mm

垂直燃焼室: W300 * D450 * H1200mm

Product Name: EC60332/EN50265-1 Single Cable Vertical Flaming Test Machine Cable flammability assessment Chamber

Gas Flow Range: 0.1-1L/min(100~1000cm3/min), Can Be Adjusted

Temperature measurement system: According to GB/T5169.14-2007 and IEC60695-11-03 standard requirements, including temperature copper (10g), K type thermocouple and diameter is 0.5 mm with stainless steel sheathed, stopwatch and thermometer etc.

Gas flow range: 0.1-1L/min(100~1000cm3/min), can be adjusted

Application: Applies to check thesingle insulation wire and cable vertical spreading test which total section area less than 0.5mm2

Burning time: continuously setting between 0.1-999.9S, during the setting time flame could continuously burning the specimen

Temperature measurement system: According to GB/T5169.14-2007 and IEC60695-11-03 standard requirements, including temperature copper (10g), K type thermocouple and diameter is 0.5 mm with stainless steel sheathed, stopwatch and thermometer etc.

Standards: IEC60332-1-1:2004, IEC60332-1-2:2004, IEC60332-1-3:2004, EN50265-1, EN50265-2-1

Area flow range: 0.1-1m3/h(1.66~16.6dm3/min), can be adjusted

Gas flow range: 0.1-1L/min(100~1000cm3/min), can be adjusted

Standards: IEC60332-1-1:2004, IEC60332-1-2:2004, IEC60332-1-3:2004, EN50265-1, EN50265-2-1

Chamber Size: W300 * D450 * H1200mm

内部寸法 (WxDxH): 300*200*120mm

外の寸法 (WxDxH): 430*690*560mm

温度範囲: 最大 1200°C

表示正確さ: ±1°C

ステンレス鋼の小型試験枠: 450×300×150mm

背筋枠の内面の寸法: 450±2×450±2mm

椅子枠の内面の寸法: 450±2×300±2mm

ステンレス鋼の大きなテストジグ: 450×450×300mm