logo
製品
ホーム / 製品 / 燃焼性の試験装置 /

Single Flame Source Test Ignitability Tester EN ISO 11925-2/DIN 53438

Single Flame Source Test Ignitability Tester EN ISO 11925-2/DIN 53438

ブランド名: SKYLINE
モデル番号: SL-FL15
Moq: 1台
価格: negotiated
支払い条件: T/T、L/C、Western Union、MoneyGram
供給能力: 1ユニット/月
詳細情報
起源の場所:
中国
証明:
CE
建材:
燃焼性試験機 着火性試験機
規格:
EN11925-2
アプリケーション:
建材
ボックスサイズ:
835×奥行400×高さ815mm
材料:
1.5mm ステンレス鋼
タッチパネル:
7インチ効果ディスプレイ,サイズ 15.5cm 幅 8.6cm
観察窓:
前側と右側にある2つの大きな視界窓
解像度: 800*480:
800*480
パッキングディメンション:
長さ103*幅50*高さ100mm
総重量:
82.5kg
パッケージの詳細:
合板ケース
供給の能力:
1ユニット/月
ハイライト:

Single flame ignitability tester

,

EN ISO 11925-2 flammability tester

,

DIN 53438 test equipment

製品説明
Single Flame Source Test Ignitability Tester EN ISO 11925-2/DIN 53438
Building Material Flammability Test Furnace with Touch Screen Control

The building materials flammability test furnace is in the normal combustion environment, with a small flame directly impacted the vertical specimen to determine the combustibility of the building products. The flammability test furnace for building materials is based on the principle of Kleinbrenner (Klein Brenner), which is directly impacted by a vertical flame. It is used to determine the combustion performance of B grade building materials (namely, the judgement of burning performance and flame retardant grade B of building materials).

Standards

EN ISO 11925-2

Features
  • The operation in line with ergonomic design, test all through the touch screen operation, high degree of automation. Otherwise, the previous test results can be stored and can access the previous test data.
  • Controllable automatic lifting of servo motor drive pattern frame.
  • The Bunsen Burner can be advanced and retreat and adjusted.
  • 1.5mm stainless steel plate box
  • Double angle observation test of 2 heat-resistant tempered glass doors, double (with lock) is convenient and practical.
  • High pressure automatic ignition and durable combustion.
  • The point fire source can be automatically tilted by 45 degrees.
  • The height of the flame is adjusted by the precision regulating valve.
Technical Parameters
Parameter Specification
Stainless steel plate box 1.5mm
Bunsen burner can be adjusted forward and backward
Diameter of burner Φ 0.17mm burner with regulator; four ¢4mm air suction inlet
Flame length of Bunsen burner 20mm ± 2mm
Ignition source can be automatically tilted by 45 degrees
The Bunsen burner applies a flame time 15s to the pattern
Flame height Adjusted by precision adjustment valve
Sample rack can move up and down and back and forth
Sample holders 2 pcs
Touch screen display 7 inches Effective display size 15.5cm in length and 8.6cm in width
Resolution 800 * 480
Communication interface RS232, 3.3V CMOS or TTL, serial port mode
Storage capacity 1G
FPGA driver display "zero" start time, can run after power on
Controller adopts low energy consumption processor, and automatically enters energy saving mode
Gas source >95% propane gas;(user should provide for themselves)
Gas pressure 10kpa~50kpa
Flue air velocity 0.7m/s only on condition of burner burning and draught hood open
Time adjustment of continuous flame 0 ~ 99minutes99seconds
Time adjustment of afterflame 0 ~ 99minutes99seconds
Timer accuracy ≤1s/h
Ambient temperature 15 ℃ ~ 25 ℃;
Relative humidity ≤ 85%
Cabinet size 835 × 400 × 815mm
Power supply voltage and power 220 V, 50 Hz, 100 W
Download Product Documentation Single Flame Source Test Ignitability Tester EN ISO 11925-2/DIN 53438 0 Single Flame Source Test Ignitability Tester EN ISO 11925-2/DIN 53438 1